AVÊÓƵ

School of Engineering and Informatics (for staff and students)

Electrical Power Systems (H6103)

Electrical Power Systems

Module H6103

Module details for 2023/24.

15 credits

FHEQ Level 6

Module Outline

This module covers all the major concepts that are required to gain a good understanding of modern electrical power networks, as well as their operation. The module also involves practical work using simulation software that is well-known in the industry, as well as hands-on laboratory work. Topics normally include the following:

• Power system structure, important aspects of power system operation, complex power, the symmetrical three-phase system, per unit system.
• Power system components, synchronous generators, transformers, transmission lines, the characteristics of the loads, voltages, currents and powers at sending and receiving ends.
• Voltage and reactive power control, the relationship between frequency and power, as well as interconnectors.
• Load flow analysis, power flow equations, admittance matrix, numerical techniques, iterative power flow algorithm.
• Fault analysis, systematic short-circuit computations, unbalanced system analysis, symmetrical component theory, power system reliability.
• Basics of power system stability, cascading failures and resilience.
• Economic dispatch and optimal power flow.
• Renewable energy basics (solar, wind and other renewables).
• Introduction to smart grids and future power systems.

The module addresses the AHEP4 Learning Outcomes: C1, M1, C2, M2, C3/M3, C4/M4, C5, M5, C6/M6, C7, M7, C9/M9, C10/M10, C11/M11, C12/M12, C14/M14, C15/M15

Pre-Requisite

Electrical Machines & Power Electronics

Library

1 Glover JD, 2012. Power System Analysis and Design, Cengage Learning, 5th ed.
2 Weedy B, 2012. Electric Power Systems, Wiley, 5th ed.
3 Anaya-Lara, Olimpo, 2009, Wind energy generation modelling and control, Wiley

Module learning outcomes

Apply the methods and techniques that they have learned to review, consolidate, extend and apply their knowledge and understanding, and to initiate and carry out projects and analysis on electrical power systems.

Critically evaluate arguments, assumptions, abstract concepts and data (that may be incomplete), to make judgements, and to use analytical methodologies and tools to achieve a solution - or identify a range of solutions - to a problem.

Demonstrate creative and innovative ability in the synthesis of solutions about, and in formulating design of, electrical power systems.

Communicate information, ideas, problems and solutions in written form.

TypeTimingWeighting
Unseen ExaminationSemester 1 Assessment60.00%
Coursework40.00%
Coursework components. Weighted as shown below.
ReportT1 Week 8 16.67%
ReportT1 Week 9 16.67%
ReportT1 Week 10 50.00%
ReportT1 Week 7 16.66%
Timing

Submission deadlines may vary for different types of assignment/groups of students.

Weighting

Coursework components (if listed) total 100% of the overall coursework weighting value.

TermMethodDurationWeek pattern
Autumn SemesterLecture1 hour11111111111
Autumn SemesterLecture2 hours11111111111
Autumn SemesterLaboratory2 hours00000100000
Autumn SemesterPractical2 hours00000011000

How to read the week pattern

The numbers indicate the weeks of the term and how many events take place each week.

Dr Spyros Skarvelis-Kazakos

Assess convenor
/profiles/372786

Please note that the University will use all reasonable endeavours to deliver courses and modules in accordance with the descriptions set out here. However, the University keeps its courses and modules under review with the aim of enhancing quality. Some changes may therefore be made to the form or content of courses or modules shown as part of the normal process of curriculum management.

The University reserves the right to make changes to the contents or methods of delivery of, or to discontinue, merge or combine modules, if such action is reasonably considered necessary by the University. If there are not sufficient student numbers to make a module viable, the University reserves the right to cancel such a module. If the University withdraws or discontinues a module, it will use its reasonable endeavours to provide a suitable alternative module.

School of Engineering and Informatics (for staff and students)

School Office:
School of Engineering and Informatics, AVÊÓƵ, Chichester 1 Room 002, Falmer, Brighton, BN1 9QJ
ei@sussex.ac.uk
T 01273 (67) 8195

School Office opening hours: School Office open Monday – Friday 09:00-15:00, phone lines open Monday-Friday 09:00-17:00
School Office location [PDF 1.74MB]